Direct Burial Transformers
NEW: Optional Die Cast Brass lid for small DB-12-60LED
• Heavy duty, high temperature, fiberglass reinforced composite construction
• 1/2″ NPS & 3/4″ NPS bottom hubs for line voltage input, feed through & low voltage output
• 1/2″ NPS hubs on cover for fixture and or photocell mounting (consult factory for details)
• 120 volt primary, 12.5v secondary, 50/60hz standard
• Multi Volt 12.5v / 13.5v / 14.5v options available (see Transformer Options below)
• Isolation type magnetic transformer – no contact between 120v and 12v windings
(compact electronic transformers available, see ordering information below)
• Magnetic circuit breaker for secondary overload/short circuit protection
• Long life, high temperature (130°C) transformer core
• Single phase, open core and coil
• 2 feet of 12/2 direct burial cable for low voltage connections (1 per circuit and/or voltage tap)
• 1/2″ NPS mounting hubs available on cover (specify at time of order if tapping required)
• NEMA12 rated enclosure for below grade direct burial applications
• UL 1838 and UL 1598 certified
• 3 year warranty on enclosure and mechanical/electrical components
TRANSFORMER OPTIONS
-MV 12.5v / 13.5v / 14.5v Multi Voltage output on any single circuit transformer
-MV1 (1) 12.5v / 13.5v / 14.5v Multi Voltage output on 2, 3 or 4 circuit transformer
-MV2 (2) 12.5v / 13.5v / 14.5v Multi Voltage outputs on 2, 3 or 4 circuit transformer
-MV3 (3) 12.5v / 13.5v / 14.5v Multi Voltage outputs on 3 or 4 circuit transformer
-MV4 (4) 12.5v / 13.5v / 14.5v Multi Voltage outputs on 4 circuit transformer
-PC Photocell mounted on top
-RPC Remote photocell with 19′ cord
-R 24V AC Relay control. (For use with existing irrigation controllers)
-220V 220v Input / 12.5v output in 300w increments (no multi voltage)
-240V 240v Input / 12.5v output in 300w increments (no multi voltage)
-277V 270v Input / 12.5v output in 300w increments (no multi voltage)
